HC 404 System • Software-based Configuration and Control
51
7.
Click on the
EDID Minder
button in the global navigation bar to open the
EDID
Minder
page.
8.
Assign an EDID (see the EDID Minder topic in the
PCS - HC 404 Module Help
file), if
required.
9.
If needed, return to the
Input/Output Configuration
page and change the
aspect ratio mode.
10.
Click on the
Picture Config
button to open the
Picture Configuration
page.
11.
Select input 2 in the
AV Controls
panel, then make any desired image adjustments,
including adjusting horizontal and vertical start locations, total pixels, and pixel phase
within the
Signal Sampling
pane (see the Picture Configuration topic in the
PCS -
HC 404 Module Help
file).
12.
Click on the
Audio Config
button to open the
Audio Configuration
page.
13.
Configure the audio input format and the output volume and format (see the Audio
Configuration topic in the
PCS - HC 404 Module Help
file).
14.
Click on the
General Settings
button to open the
General Settings
page.
15.
If needed, configure additional items:
•
Set the device name (see “Assigning a device name” in the General Settings topic in
the
PCS - HC 404 Module Help
file).
•
Set administrator and user passwords. These passwords are used for logging
into (controlling access to) the unit and its settings (see “Assigning and changing
passwords” in the General Settings topic). You cannot set a user password unless
an administrator password exists. By default, the admin password is “
extron
”
•
Set the executive mode for locking the front panel controls (see “Setting Front Panel
Lockout (Exec Mode)” in the General Settings topic).
