AVT 200HD Tuner • Installation
4
Installation
This section describes the rear panel of the AVT 200HD and provides instructions for cabling.
It covers the following topics:
•
Installation Overview
•
Rear Panel Features
•
Control Connections
Installation Overview
Follow these steps to install and set up the AVT 200HD tuner:
1.
Disconnect power
from the tuner and turn off all other devices that are connected to
it.
2.
(Optional)
Mount the unit in a rack.
Rack mount the tuner using the supplied
brackets (see the “
Mounting the Tuner
” in the “Reference Information” section).
3.
Connect the RF input.
Connect an antenna or a CATV cable to the RF In F-type
connector (
j
on the
rear panel diagram
on the next page).
4.
Connect the video output.
Connect a television or other output device to one of
the following video output connectors:
•
VID
— Composite video (
b
, top, on the
rear panel diagram
)
•
YC
— S-video (
b
, bottom, on the
rear panel diagram
)
•
RGBHV
— RGBHV (
c
on the
rear panel diagram
)
•
Component video
— YUVp/HD or YUVi (
d
on the
rear panel diagram
)
•
HDMI
— HDMI digital (
e
on the
rear panel diagram
)
5.
Connect the audio output.
Connect a speaker set, amplifier, receiver, or other
audio output device to one or more of the following connectors:
•
RCA
— Unbalanced analog (
f
on the
rear panel diagram
)
•
Captive screw
— Balanced or unbalanced analog (
g
on the
rear panel
diagram
)
•
Coax
— Digital S/PDIF (
h
on the
rear panel diagram
)
•
Optical
— (Fiber optic) Digital S/PDIF (
i
on the
rear panel diagram
)
6.
Connect control devices:
Connect your computer to one of these AVT ports to
configure and control the tuner via the Windows
®
-based software or SIS commands.
•
RS232 port
— Serial RS-232 control (
k
on the
rear panel diagram
)
•
LAN Ethernet port
— Ethernet control via Internet browser (
l
on the
rear panel
diagram
)
•
Config port
— USB connection (
b
on the
front panel diagram
in the
“Operation” section)
7.
Connect power
to the AVT by connecting a standard IEC power cord (provided) from
a 100 to 240 VAC, 50-60 Hz power source to the AC power receptacle (
a
on the
rear
panel diagram
).
