manualshive.com logo in svg

Extreme Networks Summit Summit24, Installation And User Manual

Looking for a comprehensive manual to assist you with the hardware installation of your Extreme Networks Summit Summit24? Look no further! Download our free Hardware Installation Manual today at manualshive.com, providing detailed instructions to ensure a smooth and successful setup process for your networking product.

Share
Download
background image

 

202

Summit24e3 Switch Installation and User Guide

Interior Gateway Routing Protocols

Displaying OSPF Settings

To display settings for OSPF, use the commands listed in Table 60.

OSPF LSD Display

ExtremeWare provides several filtering criteria for the

 

show ospf lsdb

 

command. You can specify 

multiple search criteria and only results matching all of the criteria are displayed. This allows you to 
control the displayed entries in large routing tables.

To display the current link-state database, use the following command:

show ospf lsdb [detail | summary | stats] area [all | <areaid>[/<len>]] lstype [all | 

as-external | external-type7 | network | router | summary-asb | summary-net] [lsid 

<id>[/<len>]] [routerid <id>[/<len>]]

The 

detail

 option displays all fields of matching LSAs in a multi-line format. The 

summary

 option 

displays several important fields of matching LSAs, one line per LSA. The 

stats

 option displays the 

number of matching LSAs, but not any of their contents. If not specified, the default is to display in the 
summary format.

A common use of this command is to omit all optional parameters, resulting in the following shortened 
form:

show ospf lsdb

The shortened form displays all areas and all types in a summary format.

Table 60: OSPF Show Commands

Command

Description

show ospf

Displays global OSPF information.

show ospf area {detail}

Displays information about all OSPF areas.

show ospf area <areaid>

Displays information about a particular OSPF 
area.

show ospf ase-summary

Displays the OSPF external route 
aggregation configuration.

show ospf interfaces {detail}

Displays information about all OSPF 
interfaces.

show ospf interfaces {vlan <name> | area 
<areaid>}

Displays information about one or all OSPF 
interfaces.

show ospf lsdb {detail} area [<areaid> | all] 
[router | network | summary-net | summary-asb | 
as-external | external-type7 |all]

Displays a table of the current LSDB. You 
can filter the display using the area ID and 
LSA type. The default setting is 

all

 with no 

detail. If 

detail

 is specified, each entry 

includes complete LSA information.

show ospf virtual-link {<areaid> <routerid> }

Displays virtual link information about a 
particular router or all routers.

Summary of Contents for Summit Summit24





















































































































































































































































Reviews:

No comments

Related manuals for Summit Summit24

Cables to Go 40020 Instruction Manual preview
40020
Brand: Cables to Go Pages: 4
National Instruments SCXI-1127 Getting Started Manual preview
SCXI-1127
Brand: National Instruments Pages: 32
Xunison Hub M50 Mesh Cube Quick Start Manual preview
Hub M50 Mesh Cube
Brand: Xunison Pages: 11
Black Box CATx Technical Specifications preview
CATx
Brand: Black Box Pages: 4
Woxcon MUH44A-H2 User Manual preview
MUH44A-H2
Brand: Woxcon Pages: 42
Digitronic CamCon DC30 User Manual preview
CamCon DC30
Brand: Digitronic Pages: 24
H3C S5120-EI Series Configuration Commands preview
S5120-EI Series
Brand: H3C Pages: 29
WTI IPS-400 User Manual preview
IPS-400
Brand: WTI Pages: 56
DX Engineering RR8B-HP Manual preview
RR8B-HP
Brand: DX Engineering Pages: 4
National Instruments SwitchBlock Getting Started Manual preview
SwitchBlock
Brand: National Instruments Pages: 12
Comm-Tec MTX0804RA User Manual preview
MTX0804RA
Brand: Comm-Tec Pages: 10
Gembird UHB-C224 User Manual preview
UHB-C224
Brand: Gembird Pages: 11
Goobay MS-506PQ-N User Manual preview
MS-506PQ-N
Brand: Goobay Pages: 16
Top View KS-104OSD User Manual preview
KS-104OSD
Brand: Top View Pages: 13
BZB Gear BG-UHD44MA User Manual preview
BG-UHD44MA
Brand: BZB Gear Pages: 27
Konig KN-HDMIMAT20 Manual preview
KN-HDMIMAT20
Brand: Konig Pages: 52
Intellinet 560641 Instructions Manual preview
560641
Brand: Intellinet Pages: 12
ADDER ePowerSwitch 8XM Master Brochure preview
ePowerSwitch 8XM Master
Brand: ADDER Pages: 2

Brands by name

Popular brands

Load more brands