Extreme Networks Summit Summit24, Installation And User Manual

Page: 108 / 244

108 Summit24e3 Switch Installation and User Guide
Access Policies
Figure 19: OSPF access policy example
To configure the switch labeled Internet, the commands would be as follows:
create access-profile okinternet ipaddress
config access-profile okinternet mode permit
config access-profile okinternet add 192.1.1.0/24
config ospf asbr-filter okinternet
Making Changes to a Routing Access Policy
You can change the routing access policy by changing the associated access profile. However, the
propagation of the change depends on the protocol and policy involved. Propagation of changes
applied to RIP access policies depends on the protocol timer to age-out entries.
NOTE
Changes to profiles applied to OSPF typically require rebooting the switch, or disabling and re-enabling
OSPF on the switch.
Removing a Routing Access Policy
To remove a routing access policy, you must remove the access profile from the routing protocol or
VLAN. All the commands that apply an access profile to form an access policy also have the option of
choosing
none
as the access profile. Using the
none
option removes any access profile of that particular
type from the protocol or VLAN, and, therefore, removes the access policy.
EW_002
Internet
Backbone (OSPF)
area 0.0.0.0
Sales
area 0.0.0.2
Engsvrs
area 0.0.0.1
10.0.0.10 / 24
10.0.0.11 / 24
10.1.1.1 / 24 10.2.1.1 / 24
10.0.0.12 / 24
Switch being
configured
Internet
Engsvrs Sales