Extreme Networks EN-SLX-9030-48S-4C, Hardware Installation Manual

Page: 16 / 114

NOTE
The default is Auto Mode, but the user can override the default speed. (Mismatched speed configuration causes the link to be
disabled and a RASLog message to be sent.
device# show interface ethernet 0/51
Ethernet 0/51 is admin down, line protocol is down (admin down)
:
Pluggable media present
Interface index (ifindex) is 201744640 (0xc066100)
MTU 1548 bytes
IP MTU 1500 bytes
Maximum Speed : 100G
LineSpeed Actual : Nil
LineSpeed Configured : Auto-Detect, Duplex: Full
Configuring port speed:
device(conf-if-eth-0/51)# speed
Possible completions:
40000 40Gbps
100000 100Gbps
auto Auto Detection (default)
SLX(conf-if-eth-0/51)# speed 40000
Configuring breakout mode:
device# configure
Entering configuration mode terminal
SLX(config)# hardware
SLX(config-hardware)# connector 0/50
SLX(config-connector-0/50)# breakout mode
Possible completions:
4x10g breakout 4x10G mode
4x25g breakout 4x25G mode
• Breakout port in 10G mode (with 100G or 40G optic media):
device(config-connector-0/49)# breakout mode 4x10g
%Warning: connector mode change is a disruptive command.
Please save the running-config to startup-config and reload the switch or power-cycle linecard for
the changes to take effect.
• Breakout port in 25G mode (with 100G optic media):
SLX(config-connector-0/50)# breakout mode 4x25g
%Warning: connector mode change is a disruptive command.
Please save the running-config to startup-config and reload the switch or power-cycle linecard for
the changes to take effect.
Confirming breakout mode:
device# show ip int br | i 52
Ethernet 0/52:1 unassigned default-vrf administratively down down
Ethernet 0/52:2 unassigned default-vrf administratively down down
Ethernet 0/52:3 unassigned default-vrf administratively down down
Ethernet 0/52:4 unassigned default-vrf administratively down down
Confirming interface configuration:
•
device# show interface ethernet 0/52
Ethernet 0/52 is admin down, line protocol is down (admin down)
:
100G Interface
LineSpeed Actual : Nil
LineSpeed Configured : 100000 Mbit, Duplex: Full
:
Management commands
ExtremeSwitching SLX 9030 Hardware Installation Guide
16 9035691-02 Rev AD