Extreme Networks EN-SLX-9030-48S-4C, Hardware Installation Manual

Page: 15 / 114

FIGURE 2 Nonport-side view
1. Grounding lug
2. Fan modules
3. AC power input connectors
Device management options
You can use the management functions built into the device to monitor the port status, physical status, and other information to help you
analyze device performance and to accelerate system debugging. The device automatically performs a power-on self-test (POST) each
time it is turned on.
You can manage the device using any of the management options listed in the following table.
TABLE 7 Management options for the device
Management tool Out-of-band support In-band support Reference documents
Command line interface (CLI) Ethernet or serial connection N/A ExtremeSwitching SLX-OS Management
Configuration Guide
REST or NETCONF/YANG APIs. Ethernet connection Yes ExtremeSwitching SLX-OS Management
Configuration Guide
Standard SNMP applications Ethernet or serial connection N/A ExtremeSwitching SLX-OS Management
Configuration Guide
Management commands
This section presents examples of the CLI used to manage ports and verify configurations.
Port management commands
Enabling/disabling ports:
device# configure
Entering configuration mode terminal
SLX(config)# interface Ethernet 0/12
SLX(conf-if-eth-0/12)# shutdown
2018/08/06-17:12:25, [NSM-1020], 1224, DCE, INFO, SLX, interface Ethernet 0/12 is administratively down.
2018/08/06-17:12:25, [NSM-1003], 1225, DCE, INFO, SLX, interface Ethernet 0/12 is link down.
SLX(conf-if-eth-0/12)# no shutdown
2018/08/06-17:12:39, [NSM-1019], 1229, DCE, INFO, SLX, interface Ethernet 0/12 is administratively up.
2018/08/06-17:12:42, [NSM-1001], 1232, DCE, INFO, SLX, interface Ethernet 0/12 is online.
Media auto-detect:
Management commands
ExtremeSwitching SLX 9030 Hardware Installation Guide
9035691-02 Rev AD 15