EXTREME HEAT SOLAR
13
100
l
NO PRESSURE EVACUATED TUBE SYSTEM
26.
Install the isolation material before fastening
the pipes.
Picture 1.22 Install the pipe isolation.
27.
If a backup element will be used, install the
element and thermostat in the holes on the
side of the geyser. Position the seal for the
element cover.
28.
Close the element with the element cover and
supplied self-tapping screws.
29.
Install a stainless steel pipe into the hot water outlet
before connecting the hot water from the geyser to the
house.
30.
Connect the cold water supply from the house to the
cold water inlet on the reservoir.
Picture 1.26 Connect the cold water supply to the inlet on the reservoir
Picture 1.23 Install the backup element and
thermostat and the seal for the element cover
Picture 1.25 Install a stainless steel pipe in the
hot water outlet.
Picture 1.24 Close the element with the cover
