Page 24
10. INSERT OPERATION
10.1 Normal operation
Once the stove is lit, you can adjust
the heat setting using buttons
4
and
5.
Pressing button
4
decreases the heat setting and hourly pellet consumption;
pressing
5
increases them. In addition
to the feed rate, the room temperature can be set directly from the control panel.
The stove
adjusts itself automatically in relation to the war
m air ventilation.
The contents of the hopper should be monitored to prevent the stove going out due to a lack of
fuel.
A
TTENTION!
1. The cover of the pellet container must always be kept closed except when loading
fuel.
2. The sacks of pellets must be kept at least 1.5 metres away from the stove.
3. The hopper should always be kept at least half full.
4. Before refilling, make sure that the appliance is switched off.
10.2 Shutdown
Pr
ess button
1
for thr
ee seconds
.
When the three seconds have elapsed, the stove automatically starts the shutdown stage, cutting
off the pellet feed; the display will show “
PULIZIA FINALE
” (FINAL CLEANING).
Both the exhaust motor and warm air ventilation motor continue to run until the stove
temperature has dropped sufficiently. When the exhaust motor stops, the display will show “
OFF
”.
Summary of Contents for INSERTO COMFORT MINI
