Page 28
TO ENABLE/DISENABLE
the weekly programmer, follow the procedure described at
parameter
1
of the
Set Clock Menu.
Note:
When the programmer is enabled, the corresponding LED lights up on the display (see
Table of Display Messages
).
Manual controls always have priority over the programming.
11.4 DAY/NIGHT MENU
The day/night temperature function makes it possible to switch the stove on/off automatically
based on two selected temperatures.
This system enables you to select one temperature for daytime and one for night.
To access the parameters of the day/night temperature function, proceed as follows:
1.
Press the
menu 1
button
the display will show
“SET TEMP AMBIENTE”
2.
Press the
menu 1
button again
the display will show
“MENU SET OROLOGIO”
3.
Press button 5 twice
the display will show
“MENU GIORNO NOTTE”
4.
Confirm with the
menu 2
button.
When you have entered the programming function, the display will show the following parameters:
Parameter
A
DAY NIGHT
Use buttons
4
and
5
to enabling/disenabling the day/night temperature function.
To confirm and continue with programming, press the
menu 2
button.
To return to the previous parameter, press the
menu 1
button.
Parameter b
DAY START
Use buttons
4
and
5
to set the day start/night end.
To confirm and continue with programming, press the
menu 2
button.
To return to the previous parameter, press the
menu 1
button.
Parameter c
DAY END
Use buttons
4
and
5
to set the day end/night start.
To confirm and continue with programming, press the
menu 2
button.
To return to the previous parameter, press the
menu 1
button.
Parameter d
MAX DAY TEMPERATURE
Use buttons
4
and
5
to set maximum temperature for the day period.
To confirm and continue with programming, press the
menu 2
button.
To return to the previous parameter, press the
menu 1
button.
Parameter E
MAX NIGHT TEMPERATURE
Use buttons
4
and
5
to set maximum temperature for the night period.
To confirm and continue with programming, press the
menu 2
button.
To return to the previous parameter, press the
menu 1
button.
When the stove switches off because the maximum temperature has been reached, the display
shows “
doff”.
The stove will switch on again automatically when the room temperature is
3
°C
lower than the maximum temperature set.
Ex.
Stove status
doff
Max. temperature set
25°C
When the room temperature goes below 22°C (25 – 3 = 22°C), the stove will automatically start
again.
Summary of Contents for INSERTO COMFORT MINI
