Page 26
When you have entered the programming function, the display will show the following parameters:
Parameter 1
CLOCK DAY
Used for setting the following values:
“day1”… “day7”
use buttons
4
and
5
to set the current
day of the week.
When the current day has been set, the weekly programmer function is automatically enabled.
To confirm and continue with programming, press the
menu 2
button.
To return to the previous parameter, press the
menu 1
button.
Parameter 2
CLOCK HOURS
Use buttons
4
and
5
to set the current hour.
To confirm and continue with programming, press the
menu 2
button.
To return to the previous parameter, press the
menu 1
button.
Parameter 3
CLOCK MINUTES
Use buttons
4
and
5
to set the current minutes.
To confirm and continue with programming, press the
menu 2
button.
To return to the previous parameter, press the
menu 1
button.
If you make an error in programming, exit with button 1 and repeat the steps described above.
11.3 Set Timer Menu
The weekly programmer enables you to set three heating periods over the course of the day, to be
used for each day of the week. The timetables for switch-on/off must be consecutive within the
same day, on a 24-hour basis (from 0 to 24), and not straddling more than one day.
e.g.: Switch-on 07.00 / switch-off 18.00
OK
Switch-on 22.00 / switch-off 05.00
WRONG
The programming procedure can be carried out with the stove on or off, and involves the following
steps:
1.
Press the
menu 1
button
the display will show
“SET TEMP AMBIENTE”
2.
Press the
menu 1
button again
the display will show
“MENU SET OROLOGIO”
3.
Press button 5
the display will show
“MENU SET CRONO”
4.
Confirm with the
menu 2
button.
When you have entered the programming function, the display will show the following parameters:
Parameter 0
TIMER ON-OFF
Use buttons
4
and
5
to enable/disenable the weekly programmer.
To confirm and continue with programming, press the
menu 2
button.
To return to the previous parameter, press the
menu 1
button.
Parameter 1
START PROGRAM 1
Use buttons
4
and
5
to set the start of the first time period from
00:00
to
23:50
or to disable the
function by setting it on
off
.
To confirm and continue with programming, press the
menu 2
button.
To return to the previous parameter, press the
menu 1
button.
Parameter 2
STOP PROGRAM 1
Use buttons
4
and
5
to set the end of the first time period from
00:00
to
23:50
or to disable the
function by setting it on
off
.
Summary of Contents for INSERTO COMFORT MINI
