Page 18
Extracting the insert
The Comfort insert has to be extracted to carry out
routine maintenance (cleaning the ash pipe at the
end of the year) or special servicing (replacing
mechanical parts in the event of damage).
N.B. These operations must be carried out by
an authorized technician, with the stove
switched off and the plug disconnected.
To extract the insert, proceed as follows:
1.
Open the fire door and use the socket
wrench provided to turn the screw in the
lower left-hand corner anticlockwise.
2.
Using the pokers provided, pull the insert
towards you until it blocks automatically.
Fitting the frames
•
Front frame
•
Side frames
Attach the front frame to the two side frames.
Fix the frames to the Comfort insert using self-
tapping screws.
N.B. Any wooden beams situated above the
insert must be protected using fireproofing
material.
Frame assembly is important, as it allows
correct air circulation in the insert and
consequently
the
most
efficient
stove
operation.
Fig. 7
Fig. 8
Fig. 9
The 2 side frames are fitted to the upper
frame using 2 screws per side.
The remaining holes on the side frames
are used for attaching the entire frame
assembly to the sides of the insert using
self-tapping screws.
Summary of Contents for INSERTO COMFORT MINI
