Explo X2 Wave Flamer Manual Download Page 53

Page: 53 / 62

15 TECHNICAL DATA

X2 Wave Flamer

Measurements

560x335x365mm

Weight

27kg (empty Tank)

Power supply

100VAC-230VAC / 350W

Casing

Stainless steel

Fuel

Isopropylalcohol, Bio-

Ethanol, ISOPAR™ / We recommend adding 2cl castor oil

per 10L fluid

Radio range

800m

Swivel radius

-105° to 105°

Effect height

10m (optional 5m nozzle available)

16 ACCESSORIES (AVAILABLE SEPARATELY)

Optional accessories for the X2 Wave Flamer

Power connection cable

To lead power through to the next device. Available in all lengths.

Tripod

Tripod for the X2 Wave Flamer. Diameter 35mm / 50kg load bearing.

5m nozzle

Nozzle for reduced flame height (4-5m).

Flight-Case

Flight Case for safe transportation of the Wave Flamers.

Dolly for Flight-Case

Dolly for up to three Flight-Cases (stacked).

Emergency shut off

Emergency shut off switch for immediate interruption of the power supply.

Tool to switch nozzles

Tool to easily change the nozzles of the Wave Flamer. 14mm socket nut long.

Bootloader cable

Programming cable to update the devices firmware.

Rain protection

Protective cover to protect the front panel from water.

Angle blockers

Mechanical angle blockers for the X2 Wave Flamer.

17 INFORMATIONS FOR USEABLE FLUIDS

To lubricate the system, we recommend adding 10-20mL

castor oild per 10L canister.

Recommended fluids are:

Bioethanol 99%, Isopropanol 99% (IPA), ISOPAR (G, H, L, M)

If non recommended fluids are used (especially coloured

fluids), damages to the system may occur, leading to a

voiding of the guarantee.

Summary of Contents for X2 Wave Flamer































































Search results

Summary of Contents for X2 Wave Flamer

Reviews:

Related manuals for X2 Wave Flamer

Brands by name

Popular brands

Explo X2 Wave Flamer, Manual

Search results

Summary of Contents for X2 Wave Flamer

Reviews:

Related manuals for X2 Wave Flamer

Brands by name

Popular brands