5
1 OVERVIEW OF THE X2 WAVE FLAMER
1.1 FUNCTION OF THE WAVE FLAMER
The flame projector X2 Wave Flamer is an effect device, used to create a moving flame effect of up to
10m height, and a vertical swivel radius of 210°.
The X2 Wave Flamer uses liquid fuels, like ISOPAR, Bioethanol or Isopropylalcohol, which are stored
in an internal canister, and sucked into the system by an integrated pumping unit. A motorized swivel
head ejects the fluid into the preferred direction.
The X2 Wave Flamer uses two solenoid valves to control the liquids flow, as well as an electrical high
voltage spark to ignite the fuel.
1.2 AREAS OF USAGE AND POSSIBILITIES
The X2 Wave Flamer is suitable for indoor and outdoor shows. Its usages can vary from concerts and
stage shows, to special effects for theatre productions and sports events (eg. Entering of the players
during football or ice hockey), pure fire shows by fire artists, or in conjunction with regular fireworks.
Via DMX, or the explo radio control, the projector can be integrated into automated shows. This allows
for a musical synchronous usage of the device.
The choice of different nozzles affects the effect height and different fluids the colouring of the flame
effect.
2 RECEIPT OF GOODS
In rare cases, problems might occur due to damages from transport, so we ask you to check the
goods for the following after receipt:
Checklist when getting your goods
Is the package damaged outside? (Take pictures!)
Are the goods damaged outside?
Are the goods fully functional?
Are all accessories delivered? (Antenna and power cable are in the back with
the canister)
We would ask you to notify us of damages or missing articles. Retroactive reclamations cannot be
taken into consideration unfortunately.
