24
4.3.6 M-SET: DMX EASY
Allows you to set the preferred channel numbers to the DMX addresses of the Easy DMX mode. A
detailed guide of the Easy DMX mode can be found in the description of the control methods. The first
DMX channel is reserved as a safety channel. The channels 2-16 are standard sequences (see
attached list of sequences).
If the DMX controller used control less than 70 DMX
channels, we recommend setting the unused DMX channels
to "OFF" (Don't assign sequences or single channels).
5 GENERAL, DEFINITIONS
5.1 DEFINITION AUDIENCE SIDE
Across from the usage elements side is the auience side (Back) of the projector. This is the side that
should be facing the audience during a show.
All sequences and positions have been created from this viewpoint. The position numbering from 1 to
15, as well as the movement definitions of left, middle and right, are thusly only correct if the device is
placed and viewed correctly. The following graphic shows the X2 Wave Flamer from above and should
give you an overview of the designation for the positions and movement areas. Further, this has the
bonus of having all control lights face away from the audience, not disturbing the viewer while
activated.
LEFT
MIDDLE
RIGHT
AUDIENCE
