6
English (original instructions)
EN
FR
DE
ES
IT
PT
NL
SV
DA
NO
FI
HU
CS
RU
RO
PL
SL
HR
ET
LT
LV
SK
BG
SYMBOLS
Important:
Some of the following symbols may be used on your tool. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and safer.
NAME
EXPLANATION
Safety Alert Symbol
7%) % + )* 7 """
Your safety is involved.
Read Your Operator's Manual
Your manual contains special messages to bring attention to
potential safety concerns as well as operating and servicing
information. Please read all the information carefully to
ensure satisfaction and safe use.
Wear eye and hearing protection
Wear eye and hearing protection when operating this
equipment.
Keep bystanders away
Keep all bystanders at least 15 m away.
Sharp Blade
Sharp cutting blades. To prevent serious injury, do not touch
cutting blades.
DESCRIPTION
1. Attachment shaft
2. End cap
3. Hedge blade
4. Blade guard
5. Knob
6. Coupler
7. Guide recess
8. Positioning hole
9. Button
10. Second hole
11. Hanger cap
FEATURES
Blade type...........................................Dual receiprocating
Blade cut angle ............................................................ 60º
Teeth pitch ............................................................25.4mm
cutting capacity ........................................................11mm
blade length ...........................................................480mm
cutting length .........................................................450mm
Weight ......................................................................2.0kg
Size ........................................... (LxWxH) 940x90x90mm
Vibration Level
(in accordance with Annex C of EN ISO 10517)
-Front Handle..........................................
=6.70 m/s
2
=7.14 m/s
2
, a
hv, eq
= 7.05 m/s
2
, K=1.5 m/s
2
-Rear Handle ..........................................
=4.16 m/s
2
=18.50 m/s
2
, a
hv, eq
=7.83 m/s
2
K=1.5 m/s
2
Sound Pressure Level at Operator Position (L
pA
)
(EN ISO 10517, EN ISO 11201, EN ISO 3744)
Idling ...............................................75.5 dB(A) K=3 dB(A)
Racing ............................................94.8 dB(A) K=3 dB(A)
Sound Power Measurements (in accordance with Annex
D of EN ISO 10517, EN ISO 3744) .......
=67.0 dB(A)
=87.9 dB(A), LpA,eq=86.9 dB(A),
LWA,eq=106.9 dB(A), K=3dB(A)
* Values measured on RBC30SESA power head
ASSEMBLY
& ' #
ATTACHMENT (Fig. 1 & 2)
#'
Never attach or adjust any attachment while
power head is running. Failure to stop the engine
may cause serious personal injury.
The attachment connects to the power head by means of
a coupler device.
Q
Loosen the knob (5) on the coupler (6) of the power
head shaft and remove the end cap (2) from the
