Exodraft Xzense, Instruction Manual, Page: 9 / 52

3111001 Xzense UK 20190731
9
Product information
Charging and battery
Action Illustration Example
Charging with USB cable
To charge the control panel, use the USB
connector at the bottom. A charge from the
entire discharged state takes approx 4-5 hours.
The control panel has a lifetime of approx 30
days in normal use.
Mounting of control panel
Step Action Illustration
1
Mark the distance on the wall from the steel plate.
Drill 2 holes with a diameter of 6 mm
Insert rawlplugs and mount the steel plate in the two
holes with two screws.
2 Slide the plastic bracket outside the steel plate
3
Fit the stop at the end of the bracket
The Xzense control panel can now be placed on the wall
bracket