manualshive.com logo in svg

Exodraft Xzense, Instruction Manual

Share
Download
Exodraft Xzense Instruction Manual Download Page 12

12

3111001 Xzense UK 20190731

Product information

2.4.  Add/pair with Power Unit

It is possible to pair the control panel and Power Unit in four different ways.

Option 1 - With power within two minutes

Step

Action

Display

1

Within the first two minutes after the power is  
connected to the Power Unit, the control panel can be 
connected without the use of ID or code.  
The connection can thus be made by using 

Add device

, 

which is found in the start menu.

ntilation

Vejrstation

Tilføj enhed

Weather

Add device

2

Select the Power Unit with the correct ID under units. 
The ID number can be found on the pairing card  
enclosed with the Power Unit.

Power Unit

Repeater

Tilføj enhed

Power Unit (F1EE)

Repeater

UNITS

3

If the connection has been made correctly,  
the control panel will report the pairing again.

Power Unit

Repeater

Tilføj enhed

Power Unit (F1EE)

Repeater

UNITS

The devices are 

now paired!

OK

Summary of Contents for Xzense





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands