Exlar Curtiss-Wright Tritex II Series, Installation And Service Manual

Page: 34 / 78

Curtiss-Wright | TRITEX II AC 75 Rev. K PN61928 7/12/2022 33
Grounding Diagram
Shielding
In order to meet the European EMC Directive for an installation and to
provide immunity from radio frequency (rf) interference and to minimize rf
emissions, the power and I/O wiring or cables must be shielded. Metallic
conduit (solid or flexible) can serve as a shield. Shields must be
connected to the enclosure at the entry / exit point. This is most easily
accomplished with EMC type cable glands.
When the “I” connector option and Exlar cables are used this function
is included in the cable/ connector construction at the actuator end.
If cable is used EMC type cable glands must
be used. Connect both ends of the cable
braided shield to the enclosure.
Customer
enclosure
Tape or heat shrink
applied to cable end