Exlar Curtiss-Wright Tritex II Series, Installation And Service Manual, Page: 23 / 78

Curtiss-Wright | TRITEX II AC 75 Rev. K PN61928 7/12/2022 22
Linear Actuator Ordering Guide
T2M/X = Actuator Type
T2M = Tritex II Linear Actuator, standard mechanical
capacity
T2X = Tritex II Linear Actuator, high mechanical capacity
BBB = Actuator Frame Size
075 = 75 mm
090 = 90 mm
115 = 115 mm
CC = Stroke Length
03 = 3 inch (76 mm) (N/A T2M/X115)
04 = 4 inch (102 mm) (T2M/X115 only)
06 = 6 inch (150 mm)
10 = 10 inch (254 mm)
12 = 12 inch (305 mm)
18 = 18 inch (457 mm)
DD = Screw Lead (linear travel per screw revolution)
01 = 0.1 inch (2.54 mm)
02 = 0.2 inch (5.08 mm)
05 = 0.5 inch (12.7 mm)
08 = 0.75 inch (19.05 mm) (T2M/X115 only)
5
E = Connections
G = Standard Straight Threaded Port with Internal
terminals, M20 x 1.5
N = NPT Threaded Port via Adapter with Internal
Terminals, 1/2” NPT
I = Intercontec Style - Exlar std, M16/M23 Style
Connector
J = Embedded leads with “I” plug 3’ standard
F = Mounting
C = Rear Clevis
D = Double Side Mount
E = Extended Tie Rod
F = Front Flange
G = Metric Rear Clevis
K = Metric Double Side Mount
M = Metric Extended Tie Rod
Q = Metric Side Trunnion
R = Rear Flange
T = Side Trunnion
G = Rod End
A = Male Metric Thread 1
B = Female Metric Thread
1
F = Female US Standard Thread
1
M = Male US Standard Thread 1
HH = Feedback Type
HD = Analog Hall Device
IE = Incremental Encoder, 8192 count resolution
AF = Absolute Feedback
III-II = Motor Stator, All 8 Pole
T2M/X075 Stator Specifications
138-40 = 1 Stack, 230 VAC, 4000 rpm
238-30 = 2 Stack, 230 VAC, 3000 rpm
338-20 = 3 Stack, 230 VAC, 2000 rpm
T2M/X090 Stator Specifications
138-40 = 1 Stack, 230 VAC, 4000 rpm
238-40 = 2 Stack, 230 VAC, 4000 rpm
238-30 = 2 Stack, 230 VAC. 3000 rpm
9
T2M/X115 Stator Specifications
138-30 = 1 Stack, 230 VAC, 3000 rpm
238-20 = 2 Stack, 230 VAC, 2000 rpm
11
238-15 = 2 Stack, 230 VAC, 1500 rpm 9, 11
(N/A with 0.1” lead)
JJJ = Voltage
230 = 115-230 VAC, single phase
KKK = Option Board
SIO = Standard I/O Interconnect
IA4 = 4-20 mA Analog I/O
COP = CANOpen w/M12 connector
CON = CANOpen, without M12 10
EIP = SIO plus Ethernet/IP w/M12 connector
EIN = SIO plus Ethernet/IP without M12 connector
10
PIO = SIO plus Profinet IO w/M12 connector
PIN = SIO plus Profinet IO without M12 connector
10
TCP = SIO plus Modbus TCP w/M12 connector
TCN = SIO plus Modbus TCP w/o M12 connector
10
MM = Mechanical Options 6
AR = External Anti-rotate
L1/2/3 = External Limit Switches
7
RB = Rear Brake
PB = Protective Bellows (N/A with extended tie rod
mounting option)
SR = Splined Main Rod
8, 2
NOTES:
1.
Chrome-plated carbon steel. Threads not
chrome-plated.
2. Consult Exlar when ordering splined stainless
steel main rod.
3. The dynamic load rating of zero backlash, preloaded
screws is 63% of the dynamic load rating of the
std non-preloaded screws. The calculated travel life
of a preloaded screw will be 25% of the calculated
travel life of the same size and lead of a non-
preloaded screw.
4. This housing option may indicate the need for special
material main rods or mounting.
5. 0.75 lead not available above 12 inch stroke.
6. For extended temperature operation consult factory
for model number.
7. Limit switch option requires AR option.