EXFO LTB-8, User Manual

Page: 171 / 402

Preparing for Automation
LTB-8
163
Changing Communication Settings
5. According to the communication type you have selected, if necessary,
customize the corresponding parameters.

For GPIB
For information on bus timing or on high-speed mode, see the
section pertaining to obtaining an optimum performance from
your unit.

For RS-232
Default value is GPIB0.
Select the check box to
enable the high-speed mode. Bus timing (in nanoseconds)
The selected address must not already be
used by the GPIB bus controller or any
other device connected to the GPIB bus.
Default value is 12.
Serial port—used to connect the RS-232 cable.
Determines the speed at which data
is sent between the unit and a
computer, in bits per second (b/s).
End-of-string (EOS) character—used
to indicate the end of a data string
(when sending or receiving data).