EXFO LTB-8, User Manual

Page: 151 / 402

Accessing Your Unit Remotely
LTB-8
143
Working With VNC
Connecting to Your Unit with VNC
Once the UltraVNC Viewer is installed on your computer, you are ready to
access your unit remotely.
To connect to your unit with UltraVNC:
1.
Connect both the computer and your unit to the same network and
make sure they can “see” each other as network restrictions might
prevent them from communicating.
2. Turn on both the computer and the unit.
3.
On your unit, ensure that ToolBox X is open.
4. At the bottom of the button bar, click .
5. Click Platform .
6.
Scroll down until you can see the IP address.
7. Write down the IP address, and then close the window.
Note:
It may take a few seconds before you see the IP address on the list.