EXFO LTB-8, User Manual

Page: 105 / 402

Working with Intel Active Management Technology
LTB-8
97
Connecting to Your Unit Remotely With AMT Remote Access

Know the AMT user name and associated password.

The default user name is:
admin

The default password is: !Exfo123
Note:
The application is case-sensitive for both the user name and password.
Note: The AMT user accounts are completely independent of Windows user
accounts. For this reason, you cannot connect to AMT Web-based
application using Windows user accounts.
To connect to your unit (Connection mode):
1.
Depending on your setup, connect a network cable between your
computer and the front Ethernet port.
OR
Connect your computer and unit to the same network.
Note:
You may have to modify the IP address of the computer to make sure that
the computer and unit can “see” each other. The IP address of the
computer must be within the same range of addresses as the IP address of
the unit (ex.: 192.168.200.20).
Note:
If several units are connected to the same network with the default static IP
address, you may have to modify the IP addresses of these units to avoid
connection problems (not accessing the right unit).
2. From your computer, start the AMT Remote Access application.