EXFO IQS-600 Series, User Manual

Page: 218 / 379

Using IQS Products in an Automated Test Environment
210
IQS-600
Monitoring Remote Commands
3. Do one of the following:

If monitoring using GPIB, ActiveX or RS-232, click
Connect to IC
.
You are automatically connected to the monitoring system. The
Disconnect from IC button becomes available for you when you
are ready to disconnect.
Once connected, your current connection information will appear
in the upper part of the window, and the commands will appear as
a list in the lower part of the window.
With the History parameter, you determine how many commands
you want to keep in the list. You can change the number by using
the arrow buttons on each side of the list.
To clear the history, click .
To view the list in any word processor, click to copy it to the
clipboard, and then paste it in your document. You can use any
program, as the list is copied in text format.
To exit the monitoring utility, click Exit .
For more information, see the section on using your unit in an
automated test environment.
Connection
information
Incoming
commands