EXFO IQS-600 Series, User Manual

Page: 205 / 379

Using IQS Products in an Automated Test Environment
Integrated Qualification System
197
Using the EXFO Getting Started Applications
Using the EXFO Getting Started Applications
Once the LabVIEW drivers are installed, the Getting Started demo
applications are available to demonstrate the following:

How to open and close the communication link between the remote
computer and the device.

Some of the available functions (by loading the necessary
.vi
files).
All the .vi files related to an instrument are presented in the same folder. By
default, they are found under the location where your LabVIEW files were
installed.
All Getting Started filenames follow this pattern: InstrumentxxxxTest.vi
(where xxxx corresponds to the product code).
Each Getting Started application offers a user interface (called Front Panel
and a design view (called Block Diagram).
Note: The look of the interface may change slightly depending on the operating
system you are using.
Getting Started file