CLI Command Reference
BV10-100 and BV10-1000
53
Operation Commands
Tools Command
ping
Description
Initiates a ping of a specified destination using the LAN or Test port and
displays the results. Refer to
on page 76 for more information.
Syntax
ping
destination_IP
[repetition
number_of_packets
| continuous]
[size
size_in_bytes
]
[ttl
value
]
[delay
value_in_ms
]
[timeout
value_in_ms
]
exit_interface
The
delay
parameter is the interval between packets.
The
exit_interface
parameter can be either
lan
or
test
and is required.
The parameters can be entered in any order. If a parameter is not
specified, the default value is used as follows:
4
for
repetition
number_of_packets
32
for
size
size_in_bytes
128
for
ttl
value
1000
for
delay
value_in_ms
4000
for
timeout
value_in_ms
Example
bv10-100>
ping 10.10.10.20 lan
PING 10.10.10.20 (10.10.10.20) from 10.10.10.180 eth0: 24(52) bytes of data.
32 bytes from 10.10.10.20: icmp_seq=1 ttl=128 time=10.0 ms
32 bytes from 10.10.10.20: icmp_seq=2 ttl=128 time=0.000 ms
32 bytes from 10.10.10.20: icmp_seq=3 ttl=128 time=0.000 ms
32 bytes from 10.10.10.20: icmp_seq=4 ttl=128 time=0.000 ms
--- 10.10.10.20 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3010ms
rtt min/avg/max/mdev = 0.000/2.500/10.000/4.330 ms