4.1 Right/Left Handrail Support Tubes Installation
Use the Multi Hex Tool with Phillips Screwdriver to remove four Bolts (24) from the Back
and Seat Support Bracket (17). Align and hold the Right Handrail Support Tube (21) onto the
Back and Seat Support Bracket (17), use the Multi Hex Tool with Phillips Screwdriver to
tighten the Bolts (24) until secure. Repeat the same assembly steps to the Left Handrail
Support Tube (23).
4.2 Seat Installation
Use the 5mm Allen Wrench to remove four Big Washers (18) and four Bolts (19) from the Seat
(16). Align and hold the Seat (16) onto the Back and Seat Support Bracket (17), use the 5mm Allen
Wrench to tighten four Big Washers (18) and four Bolts (19) until secure.
.
14
ASSEMBLY
Tool:
5mm Allen Wrench
1PC
Tool:
5mm Allen Wrench
1PC
Summary of Contents for 1112.8-101016
