TROUBLE SHOOTING
PROBLEM:
The recumbent bike wobbles when in use.
SOLUTION:
Turn the Rear Stabilizer End Caps on the Rear Stabilizer or Adjustable
Leveler on the bottom of the Rear Main Frame as needed to level the recumbent
bike. See the Adjustments page 25 for reference.
PROBLEM:
There is no display on the computer console.
SOLUTION:
Remove the Computer and verify that the wires that come from the
Computer are properly connected to the wires that come from the Front Post.
SOLUTION:
Unplug the AC adaptor, Wait 30 seconds and plug it back in.
PROBLEM:
There is no heart rate reading or heart rate reading is erratic or
inconsistent.
SOLUTION:
Make sure that the wire connections for the Hand Pulse Sensors are
secure.
SOLUTION:
Be sure to hold on to the Hand Pulse Sensors with two hand at all
times. This will ensure that the reading is more accurate.
SOLUTION:
Avoid gripping the hand pulse sensors too tight. Try to maintain
moderate pressure while holding onto the hand pulse sensors.
PROBLEM:
The recumbent bike makes a squeaking noise when in use.
SOLUTION:
The bolts may be loose on the recumbent bike. Inspect all of the bolts
and tighten any loose bolts.
MAINTENANCE
Cleaning
The recumbent bike can be cleaned with a soft clean damp cloth. Do not use
abrasives or solvents on plastic parts. Wipe perspiration off the recumbent bike
after each use. Be careful not to get excessive moisture on the computer display
panel as this might cause an electrical hazard or electronics to fail.
Keep the recumbent bike, especially the computer console out of direct sunlight
to prevent screen damage.
Inspect all assembly bolts, nuts, screws, and pedals on the machine for proper
tightness every week.
Storage
Store the recumbent bike in a clean and dry environment away from children and pets.
29
TROUBLE SHOOTING & MAINTENANCE
Summary of Contents for 1112.8-101016
