Multi Hex Tool with
Phillips Screwdriver
S10, S13, S14, S15
Tool:
8.
Left/Right Handrails and Backrest Installation
Use the Multi Hex Tool with Phillips Screwdriver to remove four Big Washers (18) and
four Bolts (19) from the Backrest (5).Align and hold the Backrest (5) onto the Back and
Seat Support Bracket (17), use the Multi Hex Tool with Phillips Screwdriver to tighten four
Big Washers (18) and four Bolts (19) until firm and secure. Use the Multi Hex Tool with
Phillips Screwdriver to remove four Bolts (2) and four Washers (3) from the Back and Seat
Support Bracket (17). Align and hold the Left Handrail (4) onto the Back and Seat Support
Bracket (17), use the Multi Hex Tool with Phillips Screwdriver to tighten four Bolts (2) and
four Washers (3) until firm and secure.
Connect the Hand Pulse Sensor Wire (6) from the Right Handrail (12) to the Extension
Hand Pulse Sensor Wire (13) from the Left Handrail (4). Insert the Right Handrail (12) into
the tube hole of the Left Handrail (4) and secure with two Bolts (9), two Big Curve Washer
(10), and two Cap Nuts (11). Tighten the Cap Nuts (11) using the Multi Hex Tool with
Phillips Screwdriver provided. Connect the Extension Hand Pulse Sensor Wire I (29) to the
Hand Pulse Sensor Wire (6) and Extension Hand Pulse Sensor Wire (13).
Hardware:
ASSEMBLY
18
(#10) Big Curve Washer
2 PCS
(#11) Cap Nut
2 PCS
(#9) Bolt
2 PCS
Summary of Contents for 1112.8-101016
