Multi Hex Tool with
Phillips Screwdriver
S10, S13, S14, S15
Tool:
7.
Left and Right Foot Pedals Installation
The Cranks, Pedal Shafts, and Foot Pedals are marked “R” for Right and “L” for Left.
Insert the Left Foot Pedal (63) into the threaded hole in the left Crank (62). Turn the pedal
shaft by hand in a counter-clockwise direction until snug.
Note: DO NOT turn the pedal shaft in the clockwise direction, doing so will strip the
threads.
Tighten the Left Foot Pedal (63) using the Multi Hex Tool with Phillips Screwdriver
provided. Insert the Right Foot Pedal (61) into the threaded hole in right Crank (62). Turn the
pedal shaft by hand in a clockwise direction until snug. Tighten the pedal shaft of Right Foot
Pedal (61) with the Multi Hex Tool with Phillips Screwdriver provided.
ASSEMBLY
17
Summary of Contents for 1112.8-101016
