Rectifying faults
Checklist for rectifying faults
56
099-005546-EW501
7.12.2020
Wire feed problems
Contact tip blocked
Clean, spray with anti-spatter spray and replace if necessary
Setting the spool brake
> see 5.2.2.4 chapter
Check settings and correct if necessary
Setting pressure units
> see 5.2.2.3 chapter
Check settings and correct if necessary
Worn wire rolls
Check and replace if necessary
Kinked hose packages
Extend and lay out the torch hose package
Wire guide core or spiral is dirty or worn
Clean core or spiral; replace kinked or worn cores
Mains fuse triggers
Mains fuse triggers - unsuitable mains fuse
Set up recommended mains fuse
> see 8 chapter
.
