Design and function
MIG/MAG welding
36
099-005546-EW501
7.12.2020
5.2.7 Operating modes (functional sequences)
5.2.7.1 Explanation of signs and functions
Symbol Meaning
Press torch trigger
Release torch trigger
Shielding gas flowing
I
Welding output
Wire electrode is being conveyed
Wire creep
Wire burn-back
Gas pre-flows
Gas post-flows
Non-latched
Latched
t
Time
t
1
Spot time
t
2
Pause time
5.2.7.2 Automatic cut-out
Once the fault periods have elapsed, the automatic cut-out stops the welding process when it has been
triggered by one of two states:
• During ignition
5 s after the start of the welding process, no welding current flows (ignition error).
• During welding
The arc is interrupted for more than 5 s (arc interruption).
