Machine description – quick overview
Machine control – Operating elements
18
099-005546-EW501
7.12.2020
4.3 Machine control – Operating elements
The setting ranges for the parameter values are summarised in the Parameter overview
section
> see 11.2 chapter
.
Figure 4-3
Item Symbol Description
0
1
“Collective interference” signal light
2
“Excess temperature” signal light
3
Welding data display (3-digit)
Displays the welding parameters and the corresponding values
> see 4.3.1 chapter
4
Welding parameter display mode/power-saving mode push-button
--------- Welding current
--------- Material thickness
--------- Wire feed speed
Press for 2 s to put the machine into power-saving mode.
Activate one of the operating elements to reactivate
> see 5.6 chapter
.
5
Display, JOB
Shows the currently selected welding task (JOB number).
6
JOB-
LIST
Welding task push-button (JOB)
Select the welding task from the welding task list (JOB-LIST). The list can be found
inside the protective cap on the wire feeder and in the appendix to these operating
instructions.
