Instruction Booklet
REMO AUTO-FLEX
•
Buttons on scooter (Figure 23)
- Press folding button (N) once to auto-fold; please
make sure the scooter is fully expanded before
folding.
- Press unfolding button (O) once to auto-unfold,
please make sure the scooter is fully folded before
unfolding.
- Press (N) / (O) again to fold / unfold if folding /
unfolding process is interrupted.
•
Buttons on remote (Figure 24)
- Press folding button (P) once to auto-fold, please make
sure the scooter is fully expanded before folding.
- Press unfolding button (Q) to auto-unfold, please make
sure the scooter is fully folded before unfolding.
- Press (P) / (Q) again to fold / unfold if folding /
unfolding process is interrupted.
13
•
Do not conduct any adjustment (tiller / seat / armrest) while driving the scooter.
•
Do not get on the scooter until the seat firmly locks in the position (green point).
•
Except for removing seat, do not operate the seat sides spring if no necessary.
•
When pulling the seat springs, please grab and hold down both sides springs,
this helps user to easily release the seat latches. The latches may not be release
if the holding point of seat springs is incorrect.
1.Loosen the screws (L) by hex wrench (Fig.21)
2.Remove the springs (K) connected on the seat slide bracket.
3.Pull down and hold the seat springs (I) and push the seat by thumbs towards the back
of scooter to release the seat from latch (J).
4.When the seat is released from latch, grab the seat and push it towards the back of
scooter to remove the seat.
* When putting the seat back, insert the seat back to seat slide bracket. Push the seat
towards to the front of scooter (green point), fasten the screws (L) and insert the springs
(K) back to seat slide bracket.
* Please make sure to follow the direction of Fig.21 shown when putting springs(K) back
to the bracket.
Seat Dismantle (Figure 21.22)
：
•
When the scooter is placed on a flat ground and in lay down position.
•
When the scooter is power off and on standby for folding / unfolding, the folding / unfolding
light indicator (M) on scooter will be orange. (Figure 23)
•
When the seatback is flip down.
Folding / unfolding your scooter only when the scooter is under below circumstances
：
Figure 22
Figure 21
(L)
(K)
(J)
(I)
5.FOLDING / UNFOLDING YOUR SCOOTER
Folding / Unfolding Buttons
：
(M)
(N)
(O)
(P)
(Q)
Figure 24
Figure 23
(J)
