background image

Instruction Booklet

REMO AUTO-FLEX

2.IMPORTANT PRECAUTIONS

2

2-1 BEFORE DRIVING SCOOTER

Before take the first trip with mobility scooter, you should familiarize yourself well with the

    operation of mobility scooter and with the operation elements. Please take your time

    to read this introduction booklet.

Before driving, please evaluate the personal condition, and fully understand the operation

    of mobility scooter.

Before charging the scooter, please release the Circuit Breaker on battery box first to

    activate the system (see section 3)

Scooter is shipped with 30% of battery charge only, batteries should be fully charged

    before your journey for maximum performance and longevity (see section 6 ).

Scooter is equipped with certain type of battery (lithium or optional lead-acid), if you want

    to change it, please contact dealer to reset the battery system such as charging port

    and controller setting. Only one type of batteries can be used on scooter, do not mix

    the batteries and charge, or it may result dangers

The maximum load of the scooter is 115KG. Do not exceed the maximum permissible

    load. Exceeding the max.weight rating may result in injury to yourself.

The mobility device is only designed for use by a single occupant whose maximum weight

    does not exceed the maximum permissible load of the device. Never use the mobility

    device to transport more than one person (including children).

You should not assemble, maintain, and operate the mobility scooter before you read

    this instruction booklet.

Do not attempt to modify or dismantle the battery box or carry out any maintenance work

    that is not described in this user manual.

Do not change, modify, remove any parts (seat, shroud) from products especially safety

    protected parts such as anti-tippers.

Completely deflate the tires (air tires) before dismantling the rim or attempting.

Materials and assemblies of scooter are flame resistant.

Always keep battery box installed on scooter to avoid short-circuit, do not attempt to

    remove battery box at all possible.

Always keep the tiller screw knob fasten at whole time except when adjusting the tiller

    height. 

Do not sit or stay on scooter when scooter is on moving transport vehicles to avoid

    dangers

Turn the power (key) off before getting on or off. (see section 4-2)

Do not drive your scooter if you are under the influence of alcohol or medication that

    may affect your ability.

Do not turn off the power while driving. Doing so will bring the scooter to an abrupt stop

    and danger.

Please observe all relevant rules and regulations pertaining to pedestrians and road

    users at all times when you are driving the scooter.

Mobility device may only be used on the traffic routes for which it is approved in accordance

    with the relevant national legislation.

Always be aware of pedestrians and situations which might require extra care when

    using your scooter on public walk ways and footpaths.

Avoid driving scooter in dark or in conditions of bad weather and visibility for safety

Do not turn the power on before you get in and sit securely on the seat.

Summary of Contents for REMO AUTO-FLEX




























Reviews: