Instruction Booklet
REMO AUTO-FLEX
23
Figure 36
Figure 35
1
2
3
4
5
6
7
8
Flash
Description
What to do
1
Power On
Please turn of the power of scooter (see section 4-2) and
restart the folding / unfolding procedure.
2
Battery Low
The batteries are running low. Recharge the batteries and
restart the folding/unfolding procedure. (see section 6-4)
3
Seat springs fall off
Please contact your dealer.
4
Seatback is not
flipped down
Flip down the seatback and restart the folding / unfolding
procedure.
5
Scooter is not on flat
ccground
Scooter cannot be folding/unfolding if it’s not placed (lay down)
on a flat ground. Please place the scooter on a flat ground and
restart the folding / unfolding procedure.
6
Foreign Object on
footplate.
Check and remove the object on the footplate and restart the
folding / unfolding procedure.
7
Foreign Object
underneath the seat
Check and remove the object underneath the seat and restart
the folding / unfolding procedure.
8
Folding / unfolding
light indicator on
scooter is not in
orange (auto version)
Auto version: please wake up the scooter ( see section 5)
Folding / unfolding
Release lever is stuck
(manual version)
Hold and pull the seat base backwards with one hand while
pulling the release lever with the other hand.
Here are some suggestions about solving problems you may have when folding / unfolding
your scooter. The scooter will stop the folding / unfolding actions if errors are detected.
Please refer to below table and correct the problems.
•
If none of above correct problem, contact your authorized dealer. Do not dissemble the
scooter by yourself.
Folding / Unfolding Errors
：
