Instruction Booklet
REMO AUTO-FLEX
15
•
Please turn off the power before folding / unfolding, the scooter can only be
folding / unfolding when it is power off, the folding / unfolding
light indicator will be orange.
•
There is protection for tapping error; scooter cannot be unfolding when it is in
standing position.
•
Actions will stop if any foreign objects are detected during folding / unfolding
process. Please remove the objects and conduct the actions again.
•
When operating the remote, please stand beside the scooter for best receiving
signal.
•
When operating the folding / unfolding buttons on scooter, please reach the
buttons from the back of scooter. User may get pinched if reaching buttons from
other sides of scooter.
•
The scooter may not be folded / unfolded if the battery is low, please re-charge
the scooter by upper tiller charging port immediately and operate the folding
/ unfolding later when the scooter is fully charged. (see section 6-4)
•
Check and replace the battery for remote control if the scooter is not able to
fold / unfold.
•
When putting battery box back to scooter, gently press battery box downward
to make sure it is firmly connected to the scooter.
•
Do not disassemble battery box and open sealed parts by yourself to prevent
electric shock and damage the battery.
•
Maintenance & repair must only be carried out by a competent engineer or
authorized dealer. Please contact dealer if you need to replace internal battery.
Figure 26
1
2
3
4
5
6
•
Each battery box contains one lithium battery or (2) lead-acid
batteries (optional).
•
To remove the battery box from scooter, grab the battery
box handle, and pull it upwards as Figure.27 shown.
•
It’s highly recommended not to remove battery box out if
no necessary. Always keep battery box installed on scooter.
•
For any reason to remove the battery box, please make
sure the connectors are in sequence and in position when
put it back to scooter.
6.BATTERY GAUGE & CHARGING THE BATTERIES
6-1 DISASSEMBLING BATTERY BOX
Figure 27
