background image

Instruction Booklet

REMO AUTO-FLEX

14

The remote is not designed to be water-proof, please keep it away from humid

    environment.

Best transmit range of remote is within 10m. (The reading range will be affected

    due to the environment, barrier, and weather).

The scooter may not be folded / unfolded if the battery is low, please re-charge

    the scooter by upper tiller charging port immediately and operate the folding /

    unfolding later when the scooter is fully charged. (see section 6-4) 

Keep the remote carefully, it’s highly recommended to chain with RF sensor key.

    Please contact dealer if the key is lost.

Scooter will go into sleep if no throttle activity is detected for programmable time period.

   (Default programmable time is 3 mins.)

Please wake up the scooter before folding / unfolding. There are 3 ways to get the scooter

   back on standby for folding/unfolding:
   1.Press power switch button and turn off the power.  
   2.Press and hold the folding button (N) or unfolding button (O) on scooter for 3 seconds

      to wake up the scooter, the light indicator (M) will be orange.  
   3.Press and hold the folding button (P) or unfolding button (Q) on remote for 3 seconds

      to wake up the scooter.

How to wake up the scooter

1.Turn off the power 
2.Flip down the seatback
3.Press folding button on the remote or on scooter once to auto-fold the scooter. The seat

   will automatically moving backwards during folding.
4.The seat laches will automatically release and seat will move backwards.

How to fold the scooter (Figure 25)

1.Place the scooter to a flat ground and lay down the scooter 

2.Make sure the scooter is power off, however is awake for unfolding (the light indicator

   M will be orange).

3.Press unfolding button on the remote or scooter once to auto-unfold

   the scooter.

4.When folding and unfolding, the seat shall automatically shift to its position, however,

   please double check and push seat to its locked position (green) manually if not.

5.Flip up the seatback and double check if lock is all in its position before you get on the

   scooter.

How to unfold the scooter (Figure 26)

Figure 25

1

2

3

4

5

6

Summary of Contents for REMO AUTO-FLEX




























Reviews: