Evoqua WALLACE & TIERNAN SFC SC, Original Manual

Page: 45 / 82

SFC SC
Operation
6.
45
Softkeys
Current softkey assignments.
Stop the adaption procedure.
Select one or more options from the list provided.
Change the operating mode.
Confirm selection/Save input.
Activate password protection.
Select a menu.
Select the "Mode" menu.
Start deactivation of password protection.
Jump back one menu level.
Open next diagnosis display.
13s Feed delay
The time until dosing resumes after interruption.
100% Positioner feedback (Ym)
If the display blinks, the positioner is in manual mode and cannot
be activated.
mA? 1/5 Error message active (display bottom right)
The system has detected an error. The error can be identified
using the table in chapter 6.4 “Errors and remedies”. The number
combination states the series number of the error message and
the total number of error messages (in this example: 1. first error
of a total of five).
Scroll bar
This is used to indicate the current position of the menu arrow. If
the selection mark is at the top, the menu arrow is on parameter 1
(see example). A maximum of eight parameters per display is
possible.
General messages
This function is possible in the MANUAL mode only!
This message appears, for example, if an attempt is made to
calibrate the positioner during automatic operation. Acknowledge
by pressing ENTER or the ESC key.
BREAK
SELECT
ENTER
LOCK
MENU
MODE
UNLOCK
BACK
CHANGE
--->
1