Evoqua WALLACE & TIERNAN SFC SC, Original Manual

Page: 39 / 82

SFC SC
Installation
5.
39
5.3.3 Mounting the housing covers
1 Ensure that the cable bushes are fitted correctly.
2 Carefully fit the housing cover of the electronic module and
secure with the four housing screws.
Please note
Tighten the housing screws to a maximum torque of 0.7 Nm
(± 0.15 Nm).
5.3.4 Switching the device on
Warning!
The device is not equipped with a mains switch and is in operation
as soon as the supply voltage is applied. When entering operating
data it must be taken into account that these could directly
influence the connected system components.
Activate the power supply to the device.
The following appear in succession on the graphic display:
During the first commissioning, the language setup menu always
appears first. Open the menu with the „Enter“ key and set the
required language using the up and down arrow keys. Then press
„Enter“ to confirm the selection. When the country language is set,
this screen is no longer shown.
Picture 1 Display on startup
P l e a s e s e l e c t
l a n g u a g e !
L a n g u a g e
E n g l i s h
E N T E R B A C K
S I E M E N S
W a l l a c e & T i e r n a n
A n a l o g S c a n :
A + C - B o a r d : V : 1 . 0 0
S 1 : D E S C h l o r i n e V : 1 . 0 4
SFC
Single Function
Controller