EVOnet C-FB310DN, User Manual

Page: 29 / 58

Network Camera
23
 Noise Filter : Set the degree of the noise filtration. This adjustment can be used to decrease noise
in low light conditions. The higher the value is set, the less the noise there is. However, too high
of a setting might cause overall image blurring.
 B&W Mode
: When in the black and white mode, images are displayed in black and white and
are clearer in low light conditions.
− Off , On : Disables or enables the black and white mode.
− Auto : Disables or enables the black and white mode automatically based on the conditions
where the camera is installed.
White Balance : Click the tab to set up white balance settings.

Preset
: Select the preset white balance value based on the conditions.
− Auto : Select to adjust the white balance automatically. The system identifies the light source
of where the camera is installed and sets up the proper white balance for the conditions.
− INCANDESCENT ~ Fluorescent Cold : Select the type of light source of where the camera
is installed to set the proper white balance for the conditions.
 Manual : Select to adjust the white balance manually. Adjust the Red and Blue gain. The higher
the value, the stronger the color is.