PRIMACY
LAMINATION
39
COOLING MODE
• The cooling system has been activated.
The printer pauses for a few seconds and
restarts once it has returned to its normal
operating temperature.
WAITING FOR CARD INSERTION OR
REMOVAL
• The printer is waiting for a card to be inserted
or removed.
Insert a card or remove the card from the
manual feeder.
(see page 4)
FIRMWARE UPDATE
• The printer is updating its firmware.
The printer will be operational again
following the update.
ADVANCED CLEANING
• The printer requires advanced cleaning.
(see page 23)
ROUTINE CLEANING
(after 1,000 cards inserted)
• The printer must be cleaned.
(see page 23)
CLEANING
(after 1,200 cards inserted)
• The printer must be cleaned to avoid the risk
of the warranty being voided.
(see page 23)
