26
04-2017 5325 00
aDjustiNg
tHE
griNDEr
softwarE
If for any reason, such as grinder mainte-
nance, major changes in the distance are
required, you can set the desired changed
value manually via software.
This value is expressed in 1/6 of a turn of the
grinder door ring.
To increase the grain size (coarser grind), it
is automatically adjusted in a single opera-
tion;
To decrease the grain size (finer grind), it
is automatically adjusted when the coffee
grinder motor is in operation.
It is advisable to intercept the released
coffee, in order to prevent the brewing
unit from getting clogged up.
calibratioN
rEfErENcE
sElEctioN
The selection is determined by default and
you cannot change it.
coffEE
DosE
The maximum coffee dose that can be
used by the brewing unit is 9 g.
The dose adjustment should be made first,
by manually turning the coffee dosing de
-
vice lever.
watEr
DosE
The type of selection determines the
amount of water to be dispensed.
After setting the water value on the refer-
ence selection, the machine will ask you to
enter the infusion time.
brEwiNg
timE
The degree of the grinding has a direct ef-
fect on the infusion time, if the coffee and
water doses are the same.
By changing this value, the automatic
grinder adjustment system, acts to align the
actual time with that required.
When the appliance is in normal user
mode, continually monitoring this time will
allow you to have the optimum grinding
degree.
o
tHEr
sElEctioNs
The selected layout defines the dose of a
given selection. For reference selections,
the infusion time is a non-editable value
and is linked to the reference selection.
w
atEr
DosE
The amount of water (expressed in cdv)
to be dispensed for each selection can be
defined via software. The coffee dose and
infusion time are those defined for the refer
-
ence selection.
c
offEE
DosE
combiNatioN
Even though this combination can be
changed, the choice to do so should be
made very carefully since it has a substan-
tial effect on the quality of the dispensed
drink.
