Evoca Group Snakky SL, Installation, Use And Maintenance Manual

Page: 20 / 64

16
© by NECTA VENDING SOLUTIONS SpA 0303 204-00
TECHNICIAN MENU
Using the programming procedures described in this
section, it is possible to set all variables regarding ma-
chine configuration.
To access it is necessary to press the programming button
on the master machine and enter the information for the
machine that will be set to “filler menu” mode. Press key
from the filler menu.
N.B. By pressing again the key from the technician
menu, the machine will return to “filler” mode.
The “ ” and “ ” keys scroll through the technician menu
items, which include:
Failures Read Failures
Reset failures
Motor errors
Motors status
Reset motor errors
Program parameters Cash Prices
Master/Slave
Decimal point
Bonus
Spirals/selections Configuration
Virtual selections
Return of virtual price
Two-motor selections
Product code
Photocells Spiral settling time
Money return
Empty spiral control
Disp compt lock Operating mode
Unlock time
Out of service time
Out of serv. if open
Cold parameters
Temperature
Defrosting
Cooling unit
Display Language
Personalised strings
Miscellaneous Password
Energy saving
Menu masking
Statistics Display partial
total
Cancel partial
total
Display relat. partial
total
Cancel relat. partial
total
Print relative partial
total
Cancel partial
total
Test Complete selections
Motor test
Autotest
Miscellaneous Machine info Installation date
Machine code
Operator code
Initialising
EVADTS Pass code
Security code
Connection