7
© by NECTA VENDING SOLUTIONS SpA
0303 204-00
It is also possible to insert a divider in the already installed
spirals (see Fig. 8).
The spirals can be positioned with 22,5 degree steps by
pulling them towards the front and rotating them in the
direction of ejection.
Normally, the products can be dispensed without any
problems when the spiral end is in the lower centre posi-
tion.
The maximum size (see Fig. 6) and the number of prod-
ucts, the pitch and the direction of rotation of the spirals are
shown in the following table.
The machine is supplied with a table indicating the opti-
mum setting for the different product types.
The configuration can be changed following the indications
of the relevant chapter.
HYGIENE AND MAINTENANCE
According to current health and safety regulations, the
operator of vending machines is responsible for their
hygiene and cleaning.
It is advisable to use sanitising products (chlorine based
detergent or similar) to clean all surfaces even if not in
direct contact with food.
Some parts of the machine can be damaged by strong
detergents.
The manufacturer declines all responsibility for damage
caused
by non-compliance with the above instructions or by the
use of strong or toxic chemical agents.
Under no circumstances should sprayed water be
used.
Before any maintenance operation always switch the
machine off.
As standard feature or using special kits, the machine can
be equipped with small compartments, suitable for dis-
pensing cans, plastic bottles up to 69 mm dia., 0.2 litre
Tetra-Paks.
The compartments equipped in this way can be recog-
nised by the shape of the product support bracket (see Fig.
9).
Some bottle types can be dispensed without using the
supports.
Most bottles can be dispensed without using any special
accessories, loading the bottles up side down, so that the
cap slides in the compartment channel.
Fig. 8
1 - Spiral
2 - Divider
A
.
m
m
B
.
m
m
°
N
0
8
6
7
6
4
6
0
6
7
4
5
0
5
8
6
4
2
4
0
1
0
4
6
3
1
1
4
3
0
3
3
1
0
3
6
2
4
1
4
2
0
2
9
1
)
°
0
8
1
(
4
2
0
2
9
1
+
9
1
Fig. 9
1 - Compartment’s channel
2 - Product raised support
Summary of Contents for Snakky SL
