Evoca Group Snakky SL, Installation, Use And Maintenance Manual

Page: 8 / 64

4
© by NECTA VENDING SOLUTIONS SpA 0303 204-00
WARNING FOR SCRAPPING
Whenever the machine is to be scrapped, the laws in force
regarding environment protection should be strictly ob-
served. More specifically:
- ferrous and plastic materials and the like are to be
disposed of in authorized areas only;
- insulating materials should be recovered by qualified
companies.
- the gas inside the cooling unit, regardless of the type
(see the identification plate), should be recovered by
qualified companies by means of special equipment.
TECHNICAL SPECIFICATIONS
Power supply voltage 230 V
~
Power supply frequency 50 Hz
Absorbed power 345 W
Max. operating conditions:
Ambient temperature 32 °C
Relative humidity 65 %
Refrigeration system:
Compressor’s refrigeration output 320 W
Fan-forced evaporator
Programmable defrosting cycle
DIMENSIONS
Height 1700 mm
Width 600 mm
Depth 854 mm
Overall depth with door open 1335 mm
Weight 165 Kg
CONTROLS AND SAFETY DEVICES
- Main switch
- Timeout for power supply to dispensing motors
- Compressor overheating protection
- Line fuses
- Fuses on transformer primary and secondary windings
ACCESSORIES
A wide range of accessories can be installed on the
machine, to vary its performance.
The installation kits are supplied with their own installation
and test instructions, which must be strictly observed to
ensure the machine safety.
Installation and the following testing operations must
be carried out exclusively by personnel who have a
specific knowledge of the machine functions from a
point of view of electrical safety and health regula-
tions.
POWER CONSUMPTION
The machine power consumption depends on many fac-
tors, such as temperature and ventilation of the room
where it is installed, temperature of loaded products,
internal temperature of the refrigerated box.
Under average conditions, and namely:
- ambient temperature: 20 °C
- refrigerated box temperature: 8 °C
- temperature of loaded products
(machine completely empty) 20 °C
the following power consumption levels resulted:
- hourly stand-by power consumption 151 Wh
The above power consumption calculated from average
data should only be taken as an indication.
Fig. 3