Chapter 3 BIOS Setup
38
EC71813CLD2NA SERIES
u
Chipset
BIOS SETUP UTILITY
Advanced Chipset Settings
←→ Select Screen
↑↓ Select Item
Enter Go to Sub
Screen
F1 General Help
F10 Save and Exit
ESC Exit
WARNING: Setting wrong values in sections below may
cause system to malfunction.
North Bridge Chipset Configuration
DRAM Frequency
[Auto]
Configure DRAM Timing by SPD [Enabled]
Initiate Graphic Adapter
[PCI/IGD]
Boot Display Device
[CRT+LVDS]
LVDS Color Depth
[24BIT]
Flat Panel Type
[800x600/S/18/G104S]
UserDefine Panel Type
[Disabled]
South Bridge Chipset Configuration
PXE Boot
[Disabled]
Onboard Audio Controller
[Enabled]
V02.57 (c)Copyright 19852004, American Megatrends, Inc.
Ø
DRAM Frequency
Configure the frequency for DRAM; it is recommended to use automatic
modification instead of manual modification; otherwise, it will not be able to
power on because it is not supported by DRAM.
Ø
Configure DRAM Timing by SPD
BIOS configures the time sequence of the SDRAM according to the contents of
the SPD chip. Most of the memory bank has one small chip to save the time
sequence and capacity of the memory, i.e. the SPD chip.
Ø
Initiate Graphic Adapter
This option is used to specify the bootup priority of the video device type.
Ø
Boot Display Device
This option is used to select the default display device when booting.
