Chapter 3 BIOS Setup
EC71813CLD2NA SERIES
33
l
OnBoard Floppy Controller
Used to enable the floppy driver controller.
l
Serial Port n Address
Set the addresses of the serial port n on motherboard (n=1…10).
l
Serial Port n IRQ
Set the IRQs of the serial port n on motherboard (n=1…10).
l
Parallel Port Address
Set the addresses of the parallel port on motherboard; the default value is 378.
l
Parallel Port Mode
Set the modes for the parallel port on motherboard.
l
Parallel Port IRQ
Set the IRQs of the parallel port on motherboard.
l
Uart IRQ Attribute
Set the IRQ attribute for COM 710.
