Everglades 2012 350 LX, Owner'S Manual

Page: 129 / 164

129
Routine Maintenance
provide additional information on fuel degradation
and fuel stabilizers recommended for your engine.
In many states, most gasoline is blended with
ethanol alcohol. Ethanol is a strong solvent and
can absorb water during periods of storage. You
should refer to the engine operating manual for
information regarding alcohol blended fuels and
how it affects the operation of your marine engine.
Generator
The engine maintenance required on the genera-
tor is similar in many ways to the main engines.
The engine incorporates a pressure-type lubrica-
tion system and a freshwater cooled engine block
which is thermostatically controlled.
The seawater cooling system on the generator is
equipped with a sacrificial anode to protect cooling
system components from galvanic corrosion. The
anode should be inspected when the generator is
serviced and replaced when it is 75% of its original
size or at least once each year.
The most important factors to the generator’s lon-
gevity are proper ventilation and maintenance of
the fuel system, ignition system, cooling system,
lubrication system and the AC alternator.
Maintenance schedules and procedures are out-
lined in your generator owner’s manual. They
should be followed exactly.
13.2 Upholstery, Canvas and Enclosures
Vinyl Upholstery
The vinyl upholstery used on the seats, cushions,
bolsters and for the headliner in some cabins,
should be cleaned periodically with mild soap
and water. Any stain, spill or soiling should be
cleaned up promptly to prevent the possibility of
permanent staining. When cleaning, always rub
gently. Avoid using products containing ammo-
nia, powdered abrasive cleaners, steel wool, ink,
strong solvents, acetone and lacquer solvents or
other harsh chemicals as they can cause perma-
nent damage or shorten the life of vinyl. Never
use steam heat, heat guns or hair dryers on vinyl.
Stronger cleaners, detergents and solvents may
be effective in stain removal, but can cause either
immediate damage or slow deterioration. Lotions,
sun tan oil, waxes and polishes, etc., contain oils and
dyes that can cause stiffening and staining of vinyls.
• Dry soil, dust and dirt - Remove with a soft cloth.
• Dried on dirt - Wash with a soft cloth dampened
with water.
• Variations in surface gloss - Wipe with a water
dampened soft cloth and allow to air dry.
• Stubborn dirt - Wash with a soft cloth
dampened with Ivory Flakes® and water.
Rinse with clean water.
• Stubborn spots and stains - Spray with either
Fantastik Cleaner® or Tannery Car Care
Cleaner® and rub with a soft cloth. Rinse with
clean water.
• Liquid spills - Wipe immediately with a clean
absorbent cloth. Rinse with clean water.
• Food grease and oily stains - Spray immediately
using either Fantastik Cleaner® or Tannery Car
Care Cleaner®, wiping with a soft cloth. Take
care not to extend the area of contamination
beyond its original boundary. Rinse with clean
water.
Acrylic Canvas (Sunbrella)
Modern, bright colored canvas tops are usu-
ally fabricated from acrylic fabrics with the trade
names like Sunbrella
®
, Argonaut®, etc. Acrylic
fabrics look similar to cotton canvas but are much
more durable and color fast.
Acrylic canvas can be cleaned by using Ivory
Flakes, Ivory Liquid or another mild soap and
water. Scrub lightly and rinse thoroughly to re-
move the soap. Do not use detergents, as they
will deteriorate the waterproofing in the fabric.
The underside can be brushed with a soft brush
and sprayed with a disinfectant to prevent the
accumulation of dirt and mildew. The top or ac-
cessories should never be folded or stored wet.
In fresh water areas, the top and curtains should
be washed weekly. This is particularly important
if the boat is stored near a highway, airport or in
a large city. Residue from jet fuel, exhaust fumes
and industrial pollution can shorten the life of tops
and enclosures.
In saltwater areas, the top and curtains should be
rinsed with fresh water after each use and at least
weekly if it is stored outside. Saltwater attracts
moisture and dirt can shorten the life of fabric tops