64
where IP information can be stored and retrieved. It allows those using a dynamic IP address to be registered
centrally so users can connect to it by name. See Chapter 7 for details on using EverFocus DDNS.
What type of DVR are you installing?
______________
The default ports are
PARAGON264: 80
Paragon: 80
ECOR: 80, 1600
EDR/EDVR: 80, 1600, and 37260 – 37263
If the ports were changed in the Network Setup, use those port numbers.
6.6
WHAT IS YOUR NETWORK SETUP?
Everfocus DVR’s can operate using one of three types of networking connections.
1.
Simple One-to-One Connection: A simple one-to-one connection is the simplest type of network connection. Use a
cross-over cable
to make a direct connection from your computer to the DVR).
2.
Direct High Speed Modem Connection: A direct modem connection uses a
standard network cable
to connect the
modem directly to a computer (or in this case a modem to the DVR). This type of connection only covers single-port
modems. For a combination modem/router, use the setup described below.
3.
Router or LAN Connection – A local area network connection requires either a router or a pre-existing LAN
connection. This is the most common type of connection. A router allows multiple computers and DVR’s to access
each other as well as the Internet. It assigns different internal IP addresses to the computers.
6.7
SIMPLE ONE-TO-ONE CONNECTION
