EMV1200 FHD / EMV800 FHD Hybrid Mobile DVR
81
6.3.5
Other
You can configure the system event settings and enable the Buzzer or Email alert for
notifications.
6.3.5.1 Storage Temperature.
Log:
Check the box to record alarm events to log data.
Buzzer:
Check the box to enable buzzer when System / Storage temperature is over the
“Temp. Warning Limit”.
Email Notify:
Check the box to send email notification when system / Storage temperature is
over the “Temp. Warning Limit”. Email operation requires valid email entered in the Email
setup menu (see
6.6.4 Email
).
Network Alarm:
Check the box to send out a network alarm to a client PC. This feature works
with EverFocus’ CMS software. You will need to configure the Alarm Server for the mobile
DVR to send network alarms to the client PC (see
6.6.7 Alarm Server
).
Stop Recording:
Check box to stop recording when System / Storage’s temperature is over
the “Temp. Warning Limit”.
Send to Xfleet:
Check the box to send the event data to the Xfleet system. Note that for the
Xfleet system to receive event data from the mobile DVR in order to perform the event
actions on Xfleet system, this function must be enabled.
Temp. Warning Limit:
Sets the trigger temperature for System / Storage Temperature event
actions. Choose between 45
°
C /113
°
F and 70
°
C /158
°
F.
Alarm Output:
Select an alarm output number. When an alarm is triggered, the signal will be
transmitted through the selected alarm output relay.
Output Type:
Output action will be Transparent and cannot be changed (alarm output
remains as long as the alarm condition is active).
Save:
Click to save the settings.
